Many people have fallen in love with our exclusive Made in the U.S.A Ohm Meter for our accuracy and overall quality product.
Our Manufacturer opted to take it up a notch and come up with something really special here. Nothing was over looked in the design as well as the items selected to use in this ohm meter...as you can tell in the highlighted items below. This is ready to use out of the box. Top/lid
face will have a shine of sorts. This is from the ABS slurry used to
make sure for properly sticking to our print bed.
If you are looking for a $10.00 ohm meter...this is not for you. But if you want a high quality, custom designed with the customer in mind, one of a kind ohm meter...look no further. Minimal glue is used to hold the rocker and pcb/led in place. Thus making this it serviceable if needed.
*LIMITED EDITION ABS 3D PRINTED OHM METER*
- Accurate to +/- 0.018 Ohms
- Reads from 0.00 to 5.00 Ohms
- Default "SC " startup screen. (for smokecignals)
- Our designed PC Board layout/routing
- Our custom code
- Our production
- Our design ABS 3D Printed Box
- Stainless Steel 510 connector w/floating pin
- Keystone Contacts
- U.S.A Ohm Meter printed on inside cover
- Energizer 3v Battery included
- Cherry Rocker switch
- (4) Earth Magnets to hold the lid in place
- 30-day warranty from manufacturer defect. Any claims will need to return for review
Example of display readings: