Disposable Sample "Friend" Tip
Disposable "friend" tip, so you can share liquids without sharing cooties! Fits over the end of most driptips, or just slide it right on a normal sized cartomizer, clearomizer, or dripping atomizer.
For bulk and wholesale purchase pricing, please contact info @ smokecignals.com
Coil Master v3 Coiling Kit
The Edition v3 Coil Master is a modular coil jig which includes: 1 base, interchangeable coiling poles that now include 3.5mm and 4.0mm bits and allow for 2 strands of wire to be used at the same time!
To use it, simply attach the coiling pole you would like to
use, trap the wire, twist the cap, and get a perfect coil! It's that
Coil Master v4 Coiling Kit
Make your own coils like a pro with the Coil Master Coiling kit v4! It's so easy a monkey could do it - literally! (figuratively...).
From Coil Master:
"We’ve listened to our fans and just released the latest edition—Coiling Jig V4!
Like before, with the double-sized top caps and the larger size, simply slip in any gauge wire, spin the cap away to your desired resistance and voila!
And the Coiling Jig V4 Just Make Coil Building Much More Easier!" (emphasis here is ours -SC)
The main changes are:
1. A silicone holder is added to store the parts.
2. A Wide slot is added to hold up ribbon and wire.
The Coil Master Coiling Jig V4– 6 in 1 is a great accessory to own!
6*Coiling Poles(1.5, 2.0, 2.5, 3.0, 3.5，4.0mm )
So stop struggling with the workaday drudgery of wrapping wire around a screwdriver you don't know the diameter of just to end up losing it in the shag carpeting anyway. Take the guesswork out of coil building and make it "Much More Easier!" with Coil Master's v4 Coiling Kit!
Coil Master Tool Kit V2
The latest from Coil Master is the fully upgraded DIY Kit V2. The original was already highly praised by advanced vapers for the building of coils, the new versaon vastly improved upon it. Some examples includes a superior quality snaps, stronger splint-wooded pliers, Phillips and Fat head screws for more versatily, and appealing foldable scissors. To further boaster the user experience, slots for all the tools are designed for better ergonomic use, with bigger gaps for easy handling. There is also additional slots for two batteries storage. Build lastest coils, RBAs, and RDAs from anywhere, with this portable and dependable DIY KIt V2 from Coil Master!
- 1 Diagonal Pliers
- 1 Needle-nose Pliers
- 1 Stainless Steel Folding Scissors
- 1 Pen-Styled Cross Screwdriver
- 1 Pen-Styled Straight Screwdriver
- 1 Ceramic Tweezer (T1)
- 1 Elbow Tweezer (T3)
- 1 Kanthal Wire (24 gauge)
- 1 Ohm Meter
- 1 Coiling Kit V3
- 1 Silicon Rubber Case
3D Printed USA Ohm Meter
Many people have fallen in love with our exclusive Made in the U.S.A Ohm Meter for our accuracy and overall quality product.
Our Manufacturer opted to take it up a notch and come up with something really special here. Nothing was over looked in the design as well as the items selected to use in this ohm meter...as you can tell in the highlighted items below. This is ready to use out of the box. Top/lid
face will have a shine of sorts. This is from the ABS slurry used to
make sure for properly sticking to our print bed.
If you are looking for a $10.00 ohm meter...this is not for you. But if you want a high quality, custom designed with the customer in mind, one of a kind ohm meter...look no further. Minimal glue is used to hold the rocker and pcb/led in place. Thus making this it serviceable if needed.
*LIMITED EDITION ABS 3D PRINTED OHM METER*
- Accurate to +/- 0.018 Ohms
- Reads from 0.00 to 5.00 Ohms
- Default "SC " startup screen. (for smokecignals)
- Our designed PC Board layout/routing
- Our custom code
- Our production
- Our design ABS 3D Printed Box
- Stainless Steel 510 connector w/floating pin
- Keystone Contacts
- U.S.A Ohm Meter printed on inside cover
- Energizer 3v Battery included
- Cherry Rocker switch
- (4) Earth Magnets to hold the lid in place
- 30-day warranty from manufacturer defect. Any claims will need to return for review
Example of display readings: